Holiday cooking special$75 service call
Ovens•Ranges•CooktopsApplied toward a completed repair
Offer endsDEC 312026
Schedule Service
★★★★★5.0412 Google Reviews
We accept:We accept Visa, Mastercard, American Express, Zelle and Venmo

Local oven repair specialists

Oven Repair Near You in Irvine & Orange County

Local diagnosis for ovens that will not heat, ignite, maintain temperature, start, broil, or complete a cycle without errors or unusual noise.

$95 Service CallApplied Toward Your Completed Repair
✓ 25+ years experience✓ Licensed & insured✓ 90-day warranty
5.0 ★★★★★412 Google Reviews
Oven repair technician testing the heating circuit of an open built-in wall oven

Request oven service

Tell us what your oven is doing

Your request will be sent directly to ProStar.

Oven repair at a glance

We diagnose ovens that do not heat, run too hot or cold, or fail in only one mode. Let us know whether the issue affects Bake, Broil, or both, and which cavity is affected on a double oven. ProStar provides in-home service in Irvine and Orange County, with an estimate before you approve the work.

Common oven problems

What is preventing your oven from cooking correctly?

Heating, ignition, temperature sensing, airflow, door safety, and controls work together. We test the failed cooking mode before recommending a repair.

03

Bake or broil will not work

One cooking mode may fail because its element, igniter, relay, selector, wiring, or control circuit is damaged.

Read about oven heating problems
04

Will not start

The display may respond while cooking never begins, or the oven may appear completely dead.

05

Convection fan noise

A worn fan motor, loose blade, damaged bearing, or interference can create scraping, rattling, or humming.

06

Shuts off while cooking

Overheating, a weak connection, thermal protection, control failure, or sensor problem can interrupt cooking.

07

Door will not close or unlock

Hinges, springs, latch parts, alignment, the gasket, or a self-clean lock can prevent safe door operation.

08

Error codes

The display may report temperature, ignition, fan, door-lock, probe, relay, or communication faults.

What to check before you call

  • From the control panel, note the selected mode and whether a timer, delay, or lock indicator is displayed.
  • Tell us whether the problem is in the upper or lower oven and whether it occurs during preheat or after cooking begins.
  • Write down the error code or photograph the display if you can do so safely.

Do not force a locked door or remove panels. If you suspect a gas leak, leave the area and contact your gas utility from a safe place.

Real service calls

Recent Oven Repairs in Orange County

See the parts replaced, turnaround time, and results from completed ProStar service visits.

Kenmore Pro double wall oven temperature sensor replacement by ProStar Appliance Service
Actual ProStar service call

Upper oven temperature restored before Thanksgiving

The customer called before Thanksgiving because the upper oven was not maintaining the correct temperature. Diagnosis confirmed a faulty temperature sensor.

Read the full service story
Temperature sensor replaced immediatelyThe upper oven reached and maintained the correct temperature.

We replaced the failed sensor during the visit and tested the upper oven to verify accurate temperature response and normal cycling. The repair was completed in time for Thanksgiving—another happy ProStar customer.

See this work on Google →
Double wall oven lower cavity repaired with a new bake element and high-limit thermostat
Actual ProStar service call

Lower oven heating restored in two days

The customer reported that the lower oven had stopped heating. Diagnosis confirmed a failed bake element and high-limit thermostat.

Read the full service story
Bake element and thermostat replacedThe lower oven heated and cycled correctly after testing.

We ordered both parts from our local supplier and returned as soon as they arrived. The repair was completed two days after diagnosis, and the lower oven was restored to normal operation.

See this work on Google →
GE Profile built-in oven digital display replacement by ProStar Appliance Service
Actual ProStar service call

Digital display repaired the next day

After three years of use, the customer began having trouble with the oven's digital display. The display assembly needed replacement.

Read the full service story
New display installedThe controls and digital readout returned to normal operation.

Our local supplier had the correct part in stock. We picked it up, returned the next day, installed the new display, and tested the oven controls to confirm the repair.

See this work on Google →

Ovens we repair

Wall ovens, range ovens, convection, gas, and electric service

Oven platforms use different heat sources, sensors, convection systems, door locks, and electronic controls. Diagnosis follows the cooking mode and temperature behavior.

  • Single wall ovens
  • Double wall ovens
  • Electric ovens
  • Gas ovens
  • Convection ovens
  • Range ovens
  • Steam-combination ovens
  • Premium built-in ovens

Repair or replace?

Repair decisions should consider the heating system, controls, cavity, and appliance age

A no-heat condition or temperature error does not automatically require a new oven. We identify the failed system before you invest in replacement.

01

Repair may make sense

The oven is otherwise dependable and the fault involves an element, igniter, sensor, latch, fan, relay, or another serviceable component.

02

Replacement may be smarter

There is severe cavity or structural damage, repeated major failures, extensive corrosion, or critical parts are unavailable.

03

Stop unsafe heating or ignition

Stop using the oven if you smell gas, see arcing, notice smoke, or temperatures rise uncontrollably.

Unsure what failed? Start with professional oven diagnostics.

Call 949-382-0942

Oven brands we service

Oven repair for leading cooking-appliance brands

We service many popular wall, range, convection, gas, electric, and premium built-in oven brands.

WhirlpoolKitchenAidGESAMSUNGLGBOSCHFrigidaireElectroluxMaytagThermadorVIKINGDacorDCSWolfMieleJennAirKenmoreAmanaMonogram
✓Standard and premium cooking equipmentModel-specific diagnosis and quality replacement parts.

Why choose ProStar

Oven repair with precise testing and clear expectations

01

Model-specific testing

We trace the failed cooking mode through its sensor, heating, ignition, airflow, and control circuits.

02

Clear diagnosis

You learn what failed, why the oven is misbehaving, and what the approved repair will correct.

03

Quality replacement parts

Parts are selected for the exact oven model and installed according to the appliance design.

04

Verified operation

We test temperature response, cycling, controls, and the repaired cooking mode before completion.

How oven service works

From unreliable heat to verified cooking temperatures

  1. 1

    Describe the symptom

    Tell us the brand, fuel type, error code, and which cooking mode is affected.

  2. 2

    Test the oven

    Your technician checks heating or ignition, sensors, wiring, airflow, door safety, and controls.

  3. 3

    Review the estimate

    You receive the diagnosis and repair price before work begins.

  4. 4

    Run a test cycle

    We confirm stable temperature, correct cycling, safe ignition, fan operation, and controls.

Google customer reviews

Trusted by Orange County homeowners

Real feedback from customers who called ProStar for oven and appliance repair.

5.0★★★★★412 Google Reviews

Oven repair FAQ

Answers before your service visit

Tell us whether the oven is gas or electric, which mode fails, and any displayed code. Those details help us prepare.

Call 949-382-0942
Why is my oven not heating?

Record the full code, selected mode and whether the failure affects bake, broil or one cavity of a double oven. Different modes can use separate components. Do not force a locked door or remove panels.

Why does my oven cook unevenly?

Uneven cooking may result from a weak element, temperature-sensor drift, calibration, airflow, rack position, door seal, or control issue.

Can you repair an oven that will not ignite?

Yes. Gas ignition problems may involve the igniter, gas valve, burner, wiring, safety circuit, or electronic control.

Do you diagnose oven error codes?

Record the full code, selected mode and whether the failure affects bake, broil or one cavity of a double oven. Different modes can use separate components. Do not force a locked door or remove panels.

Do you service both gas and electric ovens?

Yes. We service many gas, electric, wall, range, convection, double, and premium built-in ovens.

Do you offer same-day oven repair?

Same-day appointments may be available depending on workload, location, and the time your request is received.

How much is the oven service call?

The service call is $95 and is applied toward the completed repair when you approve the work.

What warranty is included?

Completed oven repairs include a 90-day warranty covering installed parts and labor.

Get reliable cooking temperatures back

Schedule oven repair today

Call ProStar or send the form to request an appointment.

Call 949-382-0942